 |
 |
Your
position:Home  Product |
Y series 50-600-1000stranded wire dyeing machinery |
|
| Hank dyeing machine in this series are currently more advanced hank dyeing equipment, not only has high yield, good quality dye-saving, easy operation, etc., at the same time a wide range of uses, the characteristics of high universality, can be carried out many germplasm material strander staining, such as wool, silk category, cotton, linen line, blended yarn, acrylic knitting yarn knitting wool Pengtao body of acrylic knitting yarn can also use it in the staining varicosities before bleaching treatment to adapt to hank length from 1220 ~ 1830 mm (48 "-72") length of 60 kinds of hank dyeing Department at the same time, users may also require manufacturers to meet more or less wire length, and the former treatment and after treatment can be found in this equipment. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
3. Steam pressure: 0.2 ~ 0.3Mpa. 4. Heating method: heating pipe, installed in dyeing machine at the top and bottom to ensure that liquor temperature can be, and have steam injection pipe, can be directly heated with indirect heating. 5. Introduction liquid board, can be caused by dye in the dyeing cycle box are cloth and the only effective anti-hank generated in the process of wound treatment. 6. Transmission forms: triangular tape drive. 7. Speed way: take the initiative to transform the passive diameter of two variable-speed V-belt groove tune to suit the different requirements of yarn dyeing capacity. 8. Liquor ratio: 1:20 ~ 40. 9. To adapt to a long line of yarn Circle: 48 "~ 72" (1200 ~ 1830mm). 10. Machine forms: cabinet-shaped open-type flow. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Three, the main technical parameters
1, the maximum working temperature: 100 ¡æ. 2, heating time: 20 ¡æ ~ 100 ¡æ for about 30 minutes. 3, cooling time: 100 ¡æ ~ 80 ¡æ approximately 12 minutes (cooling water pressure to 3kg/cm2). 4, the installed capacity
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|